硅烷改性聚氨酯密封膠增塑劑對力學性能的影響

發布時間 : 2024-9-6 16:33:34
Views:

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

硅烷改性聚氨酯密封膠增塑劑對力學性能的影響

發布時間 : 2024-9-6 16:33:34
Views:

Information

幾種增塑劑對硅烷改性聚氨酯密封膠固化速度的影響。由圖2可知，聚醚二元醇的固化速度最快，聚醚三元醇次之，丁一50最I(lǐng)。采用與預聚物結構相似的增塑劑，會使水分?jǐn)U散速度加快，因此聚醚多元醇增塑劑表現優異。DIDP、苯甲酸酚、丁一50 3種增塑劑分子結構中均含有烷基長鏈結構，烷基長鏈結構為疏水基團，并隨著碳原子數的增多疏水性增強，故丁一50的固化速度最慢。

增塑劑會降低硅烷改性聚氨酯密封膠固化物硬度，提高固化物的柔順性和斷裂伸長率。表2為幾種增塑劑對硅烷改性聚氨酯密封膠力學性能的影響。隨著增塑劑中直鏈長度的延長可以適當提高硅烷改性聚氨酯密封膠的斷裂伸長率，因此下一50.DID戶、苯甲酸醋呈現出這一規律。而以聚醚多元醇為增塑劑的硅烷改性聚氨酯密封膠，斷裂伸長率要高于普通增塑劑，是由于聚醚多元醇與預聚物發生擴鏈反應，將預聚物主鏈延長，提高了斷裂伸長率，并能保持較好的力學性能。聚醚多元醇的加入可以提高預聚物的交聯密度，拉伸強度要高于加入其他3種增塑劑的體系。

增塑劑對粘接性能的影響將鋼試片用剛玉砂布打磨均勻，然后用丙酮(或丁酮)擦拭干凈，再用水沖洗后晾干，用氧化劑處理液處理1 5 mm，取出試片，用水沖洗干凈，于105一110℃烘干。試片用硅烷改性聚氨酯密封膠粘接后在(23士2)℃.R日( 55士5)%的環境中固化7d，于拉力試驗機上測試?yán)旒羟袕?qiáng)度，結果如表3所示。http://www.ruilingxiang.cn/

Scan the QR code to read on your phone

上一篇: 預聚物與丁基防水嵌縫膠增塑劑相容性測試

下一篇: 以聚醚多元醇為增塑劑的丁基防水嵌縫膠拉伸剪切強度較低

上一篇: 預聚物與丁基防水嵌縫膠增塑劑相容性測試

下一篇: 以聚醚多元醇為增塑劑的丁基防水嵌縫膠拉伸剪切強度較低